1 GC-2030AF GAS CHROMATOGRAPH MAIN
1) Dimension : (W) 515 x (H) 440 x (D) 540 mm
2) Weight : 43.5 kg (SPL, FID model)
3) Power consumption : < 2600 VA (200V series)
4) Temperatuer port : 8
5) Display device type : 7 Inch LCD with Color toch panel
6) Display customize : Yes
7) Analysis method storage : 10
8) Analysis time counter : Yes
9) Cryogen counter : Yes
10) Chromatogram monitor : Yes
11) Remote operation : LabSolutions Direct
12) Gas filter replace notification : Yes, Absorbent indicator
13) Repeatability, Area : ＜0.5% (tetradecane 2.5ng/split with AOC-30i）
14) Repeatability, Retention time : < 0.0008min (tetradecane 2.5ng/split)
15) Retention time adjustment : Yes, AART
16) Declaration of Conformity : Yes
2 GC-2030 Injection port
1) Maximum simultaneous unit installation : 3
2) Supported unit type : SPL, WBI, OCI, PTV, Single Packed
3) Temperature ramp steps : 7
4) Split ratio : 9999.9
5) Ele-Controller for purge flow : Yes
3 GC-2030 Flow controller(carrier)
1) Pressure sensor accuacy : ±2%F.S.
2) Pressure sensor repeatability : ±0.05psi (±0.34kPa)
3) Temperature coefficient : ±0.01psi/℃（±0.068kPa/℃）
4) Pressure drift : ±0.1psi/6month（±0.68kPa/6month）
5) Control amplitude : ±0.001psi
6) Flow sensor accuracy : ±5% (depending on carrier gas)
7) Flow sensor repeatability : ±0.35% of setpoint
8) Temperature coefficient : ±0.2%/℃
4 GC-2030 Flow controller(detector, aux)
1) Ele-controller : Yes
2) Ramp steps, AUX : 7
3) Ramp steps, Detector : 7
4) Flow sensor accuracy : ±3ml/min or 7% of setpoint
5) Flow sensor repeatability : ±0.35% of setpoint
6) Temperature coefficient: : ±0.2%/℃
7) SPL Maximum temperature : 450℃
5 GC-2030 Flow controller
1) Maximun installable unit quantity : 6 (CAR 3, DET 4, AUX 6) / 8 (SCD + Manual）
2) Maximum channel : "18 (without SCD）19 (with SCD）"
3) Atomosphere pressure adjustment : Yes
4) Temperatuer adjustment : Yes
5) Ele-Controller for carrier flow : Yes
6) Pressure unit : kPa, psi, bar
7) Pressure range : 0 ➝ 970 kPa
8) Pressure range, optional : 0 ➝ 1035 kPa
9) Setpoint resolution : 0.001psi (0.1kPa)
10) Supported gas kind : He,N2,H2,Ar
11) Flow rate range, N2 Ar : 0 ➝ 600mL/min N2
12) Flow rate range, H2 He : 0 ➝ 1300mL/min H2, He
13) Carrie gas flow control mode : Constant linear velocity, flow, pressure
14) Flow ramp steps : 7
15) Tool free glass insert replace : ClickTek
16) Carrier gas leak check : Yes
6 GC-2030 FID Detector
1) Maximum tenperature : 450℃
2) MDQ : ＜1.2pgC/sec (dodecane)
3) Dynamic range : 10＾7(±10％)
4) Data acquisition rate : 2 ms
5) Flow rate range(Make up) : 0 ➝ 100 ml/min
6) Flow rate range : H2：0 ➝ 100 ml/min, Air：0 ➝ 1000ml/min
7 GC-2030AF Column Oven
1) Oven Dimension : (W) 280 x (H) 280 x (D) 175 mm
"2) Temperature range,
Ambient + X ➝ Max : +2 ➝ 450 ℃
3) Temperature range, L-CO2 : -50 ➝ 450 ℃
4) Temperature range, L-N2 : -99 ➝ 450 ℃
5) Setpoint resolution : 0.1 ℃
6) Maximum analysis time : 9999.99 min
7) Ramp steps : 32
8) Temperature stability : < 0.01 ℃/1℃
9) Cooling time : 450 ➝ 50 °C in 3.4 min
10) Tool free column installation : ClickTek
11) Colmun information management : Column manager(LabSolutions)
12) Setpoint resolution, ramp : 0.01 ℃/min
13) Controllable ramp rate, 200V series : 50 ➝ 70 °C at 120 °C/min
70 ➝ 115 °C at 95 °C/min
115 ➝ 175 °C at 65 °C/min
175 ➝ 250 °C at 55 °C/min
250 ➝ 350 °C at 45 °C/min
350 ➝ 450 °C at 35 °C/min
8 Auto Injector/Sampler
1) Injector/Sampler : AOC 20 Series(i/s)
2) Dual injection : Yes (Optional)
