1. Module composition:
1) Voltage module, current module, AUX module
2) Configuration of up to 8 modules (up to 4 measurements based on single phase 1P2W)
3) AUX module can be configured up to 3 (at least 1 voltage/current module must be configured for installation)
2. Maximum recording cycle:
1) Basic 10Mpts (applied to each installed module)
2) Extended 50Mpts (optional)
3) Expansion 100Mpts (optional)
3. Voltage/Current Input Module Specification (760811/760812)
1) Input terminal type:
Voltage (760811) plug-in terminal (excitation)
Current (760812) plug-in terminal (non-excited)
External current sensor input (isolated BNC)
2) Measurement range
Voltage: 5/ 3/ 6/ 10/ 15/ 30/ 60/ 100/ 150/ 300/ 600/ 1000 Vrms
Current: 10m/ 20m/ 50m/ 100m/ 200m/ 500m/ 1/ 2/ 5 Arms
External current sensor: 50m/ 100m/ 200m/ 500m/ 1/ 2/ 5/ 10 Vrms
4. AUX module specification (760851)
1) 2ch analog or pulse input (variable)
2) Frequency characteristics: DC ~ 20MHz
3) Voltage sensitivity: 50mV ~ 100V
4) DC accuracy: +/- 0.5% of range
5) Frequency measurement range: 2Hz ~ 1MHz
6) Pulse width: 500ns or more
7) Pulse accuracy: +/- (0.05% of reading) +/- 1 count error(10ns)
5. Display: 10.4 inch TFT LCD
6. Built-in printer (option), SD Card, USB, GP-IB, ETHERNET
