◈ Equipment basic specifications

1) Product size: 300(W) x 300(L)

2) Direction of investigation: downward investigation

3) Pass Line: 950mm

4) Tact time : TBD

5) Product return spec: Carbon Teflon mesh belt SCAN method transfer / 0.5~3.0m/min

Feed speed adjustable

     Scan speed required based on product insertion interval (Pitch) of 250 mm

6) Lamp type: UV Metal Halide Lamp 8kW 4-light / Lifespan: 1,500 hr

7) Irradiation area: 450mm(W)_Scan

8) Main wavelength range: 310 ~ 410nm [365nm] à Band Pass Filter applicable (paid option).

9) Shutter: Within 2sec (light leak 0.5mW/㎠↓)

Close immediately in case of logistics congestion: Standby mode – Power 50%

10) Initial radiation: UV irradiance - 300mW/㎠

UV light quantity - 6,000mJ/㎠ (based on 20mm/sec speed)

Lamp emitting area - 550mm

11) Illumination uniformity: ±5% guaranteed

Calculation formula (Max-Min)/(Max+Min)x100%

Sensor: EIT (Power Puck2) (UVA standard) measurement point (5 points)

12) Room temperature: 70℃ or less

13) UV lamp cooling: Lamp general exhaust air cooling method

14) UV Cure lighting system: High pressure UV Metal Lamp 4th place

 - High pressure UV Metal lamp

 - Ozone less Type

- Luminous length: 550mm

- Lamp load: 145W/cm

- Lamp power: 8.0kW

15) Lamp control method: Constant Intensity control

Exposure dose control range: 4000~6000mJ/㎠

Electronic Power Supply

16) Irradiation distance: > 100㎜ (distance from irradiator surface to product surface)

17) Lamp replacement method: Replacement using lamp slide

18) Lay-Out: 2000(L)*1850(W)*1800(H)